by ep | Jul 10, 2026 | single acting cylinder
Hydraulic cylinder seal material selection is the specification decision with the greatest impact on seal service life — greater than oil cleanliness, greater than installation technique, and far greater than brand choice. The same hydraulic cylinder seal installed in...
by ep | Jul 10, 2026 | single acting cylinder
Hydraulic cylinder cushioning is a built-in end-of-stroke deceleration mechanism that prevents the piston from striking the end cap at full operating speed. A cushion spear on the piston rod enters a matched bore in the end cap near end of stroke, trapping oil that...
by ep | Jul 10, 2026 | single acting cylinder
The single acting hydraulic cylinder has been the standard actuator in log splitters for over 50 years — and for good reason. The log splitting work cycle maps precisely to the single acting cylinder’s strengths: maximum force in one direction, passive gravity...
by ep | Jul 10, 2026 | single acting cylinder
The price of a single acting hydraulic cylinder varies by an order of magnitude depending on bore size, specification, and sourcing strategy — from under £40 for a small standard unit to several thousand pounds for a large custom cylinder. Understanding what drives...
by ep | Jul 10, 2026 | single acting cylinder
A leaking hydraulic cylinder left unaddressed does not stabilise — it gets worse. The oil film on the rod attracts abrasive dust, the dust embeds in the seal lip, and the seal lip grinds the rod on every stroke, worsening both the rod surface and the leak rate in a...
